FastReligion Electronic Boost Controller Build Guide!
🏁 FastReligion Electronic Boost Controller (EBC) – DIY Build Guide
Unleash full control of your turbo system with the FastReligion Electronic Boost Controller, a DIY-friendly solution built for enthusiasts who demand precision without the price tag. This downloadable PDF contains everything you need to build your own programmable boost control system using simple, affordable components.
🔧 What It Does:
Precisely modulates boost by controlling a MAC solenoid valve using pulse-width modulation (PWM)
Adjusts boost level in real-time with a physical control knob
Designed for internal or external wastegate setups using a 3-port MAC valve
Runs at a stable 33 Hz frequency for consistent, responsive solenoid actuation
💡 Why It's Great:
Low Cost: Designed to be built for under $70 using easy-to-source components
DIY-Friendly: Wire it up, upload the code, and get to boosting — no complicated electronics or programming required
No-Nonsense Setup: Minimal parts, no resistors or diodes, just a streamlined build focused on function
Fully Documented: Includes a complete wiring diagram, MAC valve routing visual, and clear setup instructions
🔥 Who This Is For:
Designed for boost junkies, track day warriors, backyard fabricators, and anyone tired of overpriced electronic boost controllers. Whether you’re building a street car, a time attack monster, or a budget turbo project, this controller gives you direct control without blowing your budget.
⚠️ Disclaimer:
This guide is intended for personal use only. It may not be reproduced, redistributed, or resold in any form, digitally or physically. By purchasing or downloading this documentation, you agree to these terms.
🏁 FastReligion Electronic Boost Controller (EBC) – DIY Build Guide
Unleash full control of your turbo system with the FastReligion Electronic Boost Controller, a DIY-friendly solution built for enthusiasts who demand precision without the price tag. This downloadable PDF contains everything you need to build your own programmable boost control system using simple, affordable components.
🔧 What It Does:
Precisely modulates boost by controlling a MAC solenoid valve using pulse-width modulation (PWM)
Adjusts boost level in real-time with a physical control knob
Designed for internal or external wastegate setups using a 3-port MAC valve
Runs at a stable 33 Hz frequency for consistent, responsive solenoid actuation
💡 Why It's Great:
Low Cost: Designed to be built for under $70 using easy-to-source components
DIY-Friendly: Wire it up, upload the code, and get to boosting — no complicated electronics or programming required
No-Nonsense Setup: Minimal parts, no resistors or diodes, just a streamlined build focused on function
Fully Documented: Includes a complete wiring diagram, MAC valve routing visual, and clear setup instructions
🔥 Who This Is For:
Designed for boost junkies, track day warriors, backyard fabricators, and anyone tired of overpriced electronic boost controllers. Whether you’re building a street car, a time attack monster, or a budget turbo project, this controller gives you direct control without blowing your budget.
⚠️ Disclaimer:
This guide is intended for personal use only. It may not be reproduced, redistributed, or resold in any form, digitally or physically. By purchasing or downloading this documentation, you agree to these terms.
🏁 FastReligion Electronic Boost Controller (EBC) – DIY Build Guide
Unleash full control of your turbo system with the FastReligion Electronic Boost Controller, a DIY-friendly solution built for enthusiasts who demand precision without the price tag. This downloadable PDF contains everything you need to build your own programmable boost control system using simple, affordable components.
🔧 What It Does:
Precisely modulates boost by controlling a MAC solenoid valve using pulse-width modulation (PWM)
Adjusts boost level in real-time with a physical control knob
Designed for internal or external wastegate setups using a 3-port MAC valve
Runs at a stable 33 Hz frequency for consistent, responsive solenoid actuation
💡 Why It's Great:
Low Cost: Designed to be built for under $70 using easy-to-source components
DIY-Friendly: Wire it up, upload the code, and get to boosting — no complicated electronics or programming required
No-Nonsense Setup: Minimal parts, no resistors or diodes, just a streamlined build focused on function
Fully Documented: Includes a complete wiring diagram, MAC valve routing visual, and clear setup instructions
🔥 Who This Is For:
Designed for boost junkies, track day warriors, backyard fabricators, and anyone tired of overpriced electronic boost controllers. Whether you’re building a street car, a time attack monster, or a budget turbo project, this controller gives you direct control without blowing your budget.
⚠️ Disclaimer:
This guide is intended for personal use only. It may not be reproduced, redistributed, or resold in any form, digitally or physically. By purchasing or downloading this documentation, you agree to these terms.